512-777-0154
Pizza Oven Temperature Guide: How Hot for Every Pizza Style (and How to Measure It)
Temperature is the single biggest factor in how a pizza turns out. Too cool and the crust dries out before it browns; too hot and the bottom burns while the cheese is still cold. This guide gives you target temperatures for the most popular pizza styles, explains the difference between floor and dome heat, and shows you how to measure your oven accurately with an infrared thermometer.
Pizza Oven Temperature Chart by Style
| Style | Floor temperature | Approx. bake time |
|---|---|---|
| Neapolitan | 750°F – 900°F | 60 – 90 seconds |
| New York style | 550°F – 650°F | 4 – 7 minutes |
| Thin crust / tavern style | 500°F – 600°F | 5 – 8 minutes |
| Detroit and pan pizza | 475°F – 550°F | 10 – 15 minutes |
| Bread and focaccia | 400°F – 475°F | 15 – 40 minutes |
| Roasting meats and vegetables | 400°F – 600°F | Varies |
These are starting points. Every oven, dough and topping load is a little different, so use the chart as a baseline and adjust by a few degrees until you get the crust you want.
Floor Temperature vs. Dome Temperature
A pizza oven cooks from two directions at once. The floor (the cooking surface) bakes the bottom of the crust by direct contact, and the dome radiates heat down onto the toppings. In a wood fired oven the dome is usually much hotter than the floor, especially near the fire.
For a balanced pizza, you want both to finish at the same time. If the bottom burns before the top is done, the floor is too hot relative to the dome: let the floor settle for a few minutes or add a small split of wood to build flame across the dome. If the top is done and the bottom is pale, the floor needs more time to heat up.
How to Measure Pizza Oven Temperature
Built-in dial thermometers on many ovens measure air temperature near the top of the dome, which can be hundreds of degrees different from the floor. To know what your pizza is actually sitting on, you need an infrared thermometer, sometimes called an IR thermometer or thermometer gun.
How to Use an Infrared Thermometer for a Pizza Oven
- Aim at the floor where you'll launch the pizza, not at the fire or the flames. Infrared thermometers read surface temperature, not air temperature.
- Take several readings. Check the spot near the fire, the center and the front of the floor. Most ovens have hot and cool zones, and knowing them helps you place and turn each pizza.
- Get close enough. Every IR thermometer reads a spot that grows wider the farther away you stand. Stand at the oven mouth so the reading covers the floor, not the walls around it.
- Check the dome too. Point at the inside of the dome to see how much top heat you have. A big gap between dome and floor means you should give the floor more time to catch up.
- Re-check between pizzas. Each pizza pulls heat out of the floor. In a busy session, give it a minute to recover between bakes.
The Chicago Brick Oven Infrared Thermometer Gun is made for exactly this job, giving you instant floor and dome readings without reaching into the oven.
How to Control the Temperature
In a Wood Fired Oven
- To raise the heat, add small, dry hardwood splits to the fire and leave the door off so the fire gets air.
- To lower the floor temperature, wait a few minutes, or move the coals farther from your cooking area with an ash hook such as the CBO 47" Ash Hook.
- For lower-temperature cooking, let the fire die down and put the door on. A refractory oven like the Chicago Brick Oven CBO 750 holds heat for hours, which is ideal for bread and roasting after pizza night.
For a full walkthrough of lighting, preheating and cooking, see how to use a wood fired pizza oven.
In a Gas or Hybrid Oven
Gas ovens let you set the heat with a burner control, which makes it much easier to hold a steady temperature for New York or pan pizza. Hybrid ovens like the Chicago Brick Oven CBO 750 Hybrid give you a gas burner for convenience and the option to add wood for flame and flavor. Even with gas, an infrared thermometer is the best way to confirm the floor is ready.
Common Temperature Mistakes
- Trusting the dome reading. A hot dome over a cool floor gives a pale, soft bottom.
- Launching too early. The air heats long before the floor does. Wait until the floor reading is in range.
- Baking every style at maximum heat. New York and pan pizzas need time to cook through and will burn at Neapolitan temperatures.
- Not letting the floor recover. Back-to-back pizzas cool the floor; check it between bakes.
Pizza Oven Temperature FAQs
How hot should a pizza oven be?
It depends on the style: about 750°F to 900°F on the floor for Neapolitan, 550°F to 650°F for New York style, and 475°F to 550°F for Detroit and pan pizza.
What is the best thermometer for a pizza oven?
An infrared thermometer, because it reads the cooking floor directly. Dial thermometers only show air temperature in the dome.
Why is the bottom of my pizza burning?
The floor is too hot compared with the dome. Let the floor settle for a few minutes, launch the pizza farther from the fire, or build more flame across the dome so the top cooks faster.
How long does a pizza oven take to reach temperature?
Portable ovens heat in 15 to 30 minutes. Large refractory ovens such as the Chicago Brick Oven CBO 750 and CBO 1000 usually need an hour or more, but hold the heat much longer.
Gear for Accurate Temperature
Browse our pizza oven accessories for thermometers, peels and ash tools, or compare Chicago Brick Oven pizza ovens. Questions? Call us at 512-777-0154.