Skip to content
Chicago Brick Oven Board Butter wood conditioner for cutting boards

How to Oil and Season a Cutting Board (Step-by-Step)

A wooden cutting board can last for decades, but only if you keep it conditioned. Every wash pulls moisture and natural oils out of the wood. Without a fresh coat of oil, the grain dries out, turns fuzzy and pale, and eventually cracks or warps. Seasoning a board takes a few minutes and a food-safe oil. Here's exactly how to do it.

What You'll Need

  • Food-grade mineral oil to soak into the grain.
  • Beeswax (or a board cream that combines both) to seal the surface. CBO Board Butter blends food-grade mineral oil and organic beeswax in an 8 oz can.
  • A gentle cleaner that won't strip the wood, such as CBO Board Bliss, made with white vinegar, citrus extract, Castile soap and a little mineral oil.
  • Two clean, lint-free cloths.

How to Oil a Cutting Board in 5 Steps

1. Clean the Board

Scrape off any food, then wash with warm water and a gentle cleaner. Wipe with a damp cloth.

2. Let It Dry Completely

Stand the board on its edge so air reaches both sides, and let it dry fully, ideally overnight. Oil won't soak into damp wood.

3. Apply a Generous Coat

Rub a thin, even coat of oil or board butter over every surface: the top, bottom, edges and any juice groove or handle cutouts. Treating all sides evenly helps prevent warping.

4. Let It Soak In

Leave the board for at least 20 minutes; longer is better for a new or very dry board. If spots look dry and dull after soaking, they've absorbed the oil, so add a little more.

5. Buff Off the Excess

Wipe away any oil that hasn't absorbed with a clean cloth, buffing in the direction of the grain. The surface should feel smooth and satiny, not sticky.

How Often Should You Oil a Cutting Board?

  • New boards: several coats during the first week to build up protection.
  • Everyday boards: every few weeks, or about once a month for butcher blocks.
  • Any time the wood looks pale or dry, or water soaks in instead of beading up.

Best Oil for Cutting Boards (and What to Avoid)

Use: food-grade mineral oil, beeswax, or a blend of the two. Mineral oil doesn't go rancid, and beeswax adds a water-resistant seal.

Avoid:

  • Olive, vegetable, canola and other cooking oils: they can turn rancid and leave the board sticky and smelly.
  • Varnish, polyurethane and other non-food-safe finishes.

How to Clean a Wooden Cutting Board

  • Wash by hand right after use with warm water and a mild cleaner.
  • Never soak a wooden board or put it in the dishwasher; standing water causes warping and cracking.
  • Avoid bleach and harsh detergents, which strip the wood's protective oils.
  • To freshen up odors from garlic, onion or fish, use a vinegar- and citrus-based cleaner like Board Bliss.
  • Dry the board on its edge, never flat on the counter.

The Same Care Works for Peels and Rolling Pins

Wooden pizza peels, rolling pins and serving boards need the same routine. The CBO Hardwood Pizza Peel and Handcrafted Dough Prep Duo stay smooth and crack-free with a coat of Board Butter every few weeks.

Cutting Board Care FAQs

Can I use olive oil on a cutting board?
It's not recommended. Cooking oils can go rancid in the wood. Use food-grade mineral oil and beeswax instead.

What's the difference between oiling and seasoning a cutting board?
They mean the same thing: applying food-safe oil (and often wax) so the wood stays hydrated and resists moisture.

How do I know if my board needs oil?
If the wood looks pale, feels rough or water soaks in instead of beading up, it's time to condition it.

Can I sand out knife marks?
Yes. Lightly sand with fine sandpaper, wipe off the dust, then re-oil the board.

Keep Your Boards Looking New

Not sure which board to choose? Read our guide to the best wood for cutting boards, or shop all Chicago Brick Oven cutting boards and care products.

Previous article Neapolitan Pizza Dough Recipe for Wood-Fired Ovens
Next article Best Wood for Cutting Boards: Maple vs. Walnut vs. Cherry