Questions?
512-777-0154
Adirondack Chair Dimensions and the Best Wood for Adirondack Chairs
A typical Adirondack chair is about 27 to 32 inches wide, 31 to 40 inches deep, and 35 to 45 inches tall. The seat sits low and slopes back, usually around 13 to 15 inches high at the front edge and a few inches lower at the back, with wide arms around 22 to 25 inches off the ground. Because they lean back and sit low, Adirondack chairs take up more floor space than a standard dining chair.
This guide covers standard Adirondack chair dimensions, how much space to leave around them, and the best wood and materials for Adirondack chairs that last.
Standard Adirondack Chair Dimensions
| Measurement | Typical range |
|---|---|
| Overall width | About 27 to 32 in |
| Overall depth | About 31 to 40 in |
| Overall height | About 35 to 45 in |
| Seat height (front edge) | About 13 to 15 in |
| Seat width | About 20 to 23 in |
| Arm height | About 22 to 25 in |
| Weight | About 30 to 60 lbs, depending on material |
Sizes vary a lot by design, so always check the listing. Here's how some real chairs compare:
| Chair | W x D x H | Notes |
|---|---|---|
| LuxCraft Lakeside | 25 x 31.5 x 35.5 in | Compact; 20 in seat width |
| LuxCraft Deluxe | 31 x 36.5 x 38 in | Roomy 23 in seat width |
| LuxCraft Folding | 30 x 39 x 38.5 in | Folds for storage |
| LuxCraft Royal | 31 x 31.5 x 44.5 in | Tall back for head support |
| Westminster Teak Lounger | 27 x 40 x 38 in | Seat 14.5 in high in front, 11 in in back |
| Fireside Lodge Voyageur | 27 x 36 x 48 in | Rustic cedar log build |
Why Adirondack Chairs Sit So Low
The low, reclined seat is what makes Adirondack chairs so relaxing. It shifts your weight back so your shoulders and lower back are supported, and the wide arms give you a place to set a drink. The tradeoff: a low seat can be harder to get out of. If that matters to you or your guests, look for a chair with a higher front seat edge, or consider a glider or rocker version.
How Much Space Do You Need?
- Footprint: plan roughly 3 feet by 3 feet per chair, and a bit more with a footrest.
- Legroom: leave about 18 to 24 inches in front for stretching out, or room for an ottoman.
- Walkway: keep about 30 to 36 inches clear behind or between chairs so people can pass.
- Around a fire pit: set chairs far enough back to stay comfortable and safe, and follow your fire pit's clearance guidelines.
For layout help, see our furniture layout tips for small decks and patios.
Best Wood for Adirondack Chairs
Cedar
Cedar is lightweight, naturally resistant to rot and insects, and stays cooler to the touch than many materials. It weathers to silver gray if left unfinished, or keeps its color with a stain. The Fireside Lodge Voyageur Adirondack Chair is built from solid cedar logs. See whether cedar needs to be sealed.
Teak
Teak is dense and naturally oily, which makes it extremely weather resistant. It costs more, and it ages to a soft silver patina unless you oil it. The Westminster Teak Adirondack Lounger pairs well with a matching footrest.
Pressure-Treated Pine
Treated pine is the budget option. It resists rot thanks to chemical treatment but is more prone to warping and splitting, and it needs regular painting or staining.
Acacia and Eucalyptus
These hardwoods cost less than teak and look similar, but they need regular oiling and don't last as long outdoors without care.
Poly Lumber (Not Wood, but Worth Considering)
High-density poly lumber made from recycled plastic doesn't rot, splinter, or need painting. It's heavier, so it stays put in wind. LuxCraft's Deluxe Adirondack Chair and Adirondack Swivel Chair are poly options.
Material Comparison
| Material | Upkeep | Weight | Look |
|---|---|---|---|
| Cedar | Stain or seal to keep color | Light | Warm, natural, rustic |
| Teak | Low; oil to keep golden color | Medium | Classic, upscale |
| Treated pine | Paint or stain regularly | Medium | Painted or stained |
| Poly lumber | Very low; wash with soap and water | Heavy | Many colors, smooth finish |
Adirondack Chair Styles
- Classic: fan back, slatted seat, wide arms.
- Folding: easy to store in winter or move to a fire pit.
- Rocking and glider: gentle motion, and easier to get in and out of.
- Two-person: a loveseat version, like the Fireside Lodge Voyageur Two-Person Adirondack Chair.
- Swivel: turn toward the conversation or the view.
Compare every style in our Adirondack chairs collection, or browse more outdoor seating.
Adirondack Chair FAQs
What are the standard dimensions of an Adirondack chair?
Most Adirondack chairs are about 27 to 32 inches wide, 31 to 40 inches deep, and 35 to 45 inches tall, with a seat around 13 to 15 inches high at the front.
How high is the seat on an Adirondack chair?
The front edge is usually about 13 to 15 inches off the ground, and the seat slopes a few inches lower toward the back.
What is the best wood for Adirondack chairs?
Cedar and teak are top choices because both resist rot and insects naturally. Cedar is lighter and more affordable; teak is denser and longer lasting.
How much space does an Adirondack chair need?
Plan about 3 by 3 feet per chair, plus legroom in front and a clear walkway around it.
Are Adirondack chairs comfortable?
Yes. The reclined back and low seat support your back and shoulders. If getting up from a low seat is hard, consider a glider, rocker, or a design with a higher seat.